General
Pureresin Standard W is a water washable standard resin. Pureresin Standard W is suitable for use with DLP or LCD/LED 3D printers. The use of high-quality raw materials creates a high-performance resin that can be processed with very short curing times.
Characteristics
- Very short curing times

- High level of detail

- Sharp contours

- Smooth object surfaces

- Washable with water

- High elongation at break

Packaging
Pureresin Standard A is supplied in a light-protected HDPE bottle containing 0.5kg or 1kg.

storage
The resin should be stored in a dark, cool and dry place. Avoid direct sunlight and temperatures above 30°C to ensure the longest possible shelf life.

security
Read the safety data sheet carefully and follow the safety instructions. Only use the resin in a well-ventilated place. Wear nitrile gloves and safety goggles when working with resin.

processing
It is essential that you shake it before each use in order to achieve homogeneous mixing. During storage, the color particles may settle to the bottom of the bottle.
exposure times:
Base Layers: 15-40s
Remaining layers: 1.5-15sPureresin Standard W can be cleaned with water after printing. The uncured resin dissolves in the water. Never leave the printed part in the water bath for more than 15 minutes to avoid damaging the printed part. Contaminated water must be disposed of in accordance with local regulations for chemical disposal and should not be discharged into drains.

colour

The RAL color number and designation are intended as a guide only and are not intended to represent an exact specification. The effective colors are always in the similar color range as the RAL color mentioned. Full compliance with the RAL color mentioned is not guaranteed.

pureresin Standard W Hellrotorange RAL 2008 1kg

Last seen