Lighter and Better Heat Dissipation
Featuring a hollow-out design with a visible inner structure, H2 V2S Lite weighs only 175g, which contributes to less inertia and more accurate positioning.
Rapid Cooling
At the same time, the airflow is also improved to give better heat dissipation. Plus the heatsink and fan, H2 V2S Lite realizes a highly effective cooling.
Higher Flow. Faster Printing
Using a 0.6mm brass nozzle, and a longer heater block, H2 V2S Lite can output 45mm³/s to meet faster printing needs.
Labor-Saving Lever
The upgraded lever, a labor-saving and convenient design, eliminates the need to continuously hold the handle when inserting or removing filament.
Quick Detach Heat Break
Now, with the quick detach design, you are allowed to remove the heat break by simply using a hex key,making maintaining much easier and more convenient.
Dual Gear Feeding
Featuring a dual-gear system to provide an exceptional pushing force, ensuring smooth feeding and giving snappy retractions.
Adjustable Filament Loading Tension
Simply rotate the tension screw to accommodate different filaments, improving the printing success rate.
Wide Compatibility
It can collaborate with BIQU B1, BIQU BX Ender-3, Voron 2.4, Voron V0, and Vzbot.
What's in the Box
It includes an extruder, user manual, cooling fan, cables, screws and so on.
Details Make Perfect - Aluminium Alloy Case Crafted from aluminium alloy H2 V2S Lite is made for high durability,high strength,corrosion resistance, and above all, lightweight.
Filament Drive Gear - Made of tool steel plated with nano-coating to improve hardness wear resistance,corrosion resistance and provides longer life when printing abrasive materials.
Idler Arm - Made of 7075 T6 aluminum, with special blend high-performance anti-wear Mos2 grease to improve the quick release lever hap tics and enhance wear resistance.
Heat Break - H2 bi-metal(copper alloy + grade 5 titanium alloy). High performance thermal grease has been pre-applied to the heat break to increase thermal conductivity between the heat break and heat sink to improve cooling performance
More Mounting Holes - 4 screw mounting holes are available for installing an auto leveling sensor cooling tan.
(Note: The nozzle is custom-made and will be released in the near future.)
Extrusion Method
Dual Gear Extrusion
Maximum Printing Temperature
270℃
Weight
175g (including Heater Cartridge, Thermistor, and Fan)
Maximum Extrusion Force
7.5kg (depending on the filament)
Extrusion (based on the existing)
2700mm3/min (depending on the filaments)
E-step
932/mm at 16 microstep (Further calibration is recommended)
Klipper Rotation Distance
3.433
Recommended Motor Current
800mA
Gear Ratio
7:1
Drive Gear Circumference
24.5mm
Filament Diameter and Tolerance
1.75±0.05mm
Thermistor Type
NTC100K
Heater Cartridge Power
70W
Heater Cartridge Voltage
24V
*Note: Not compatible with standard NEMA14 motor.