Creality Filamenttrockner Space Pi

Get the most out of your 3D prints with the Creality Space Pi Filament Dryer. This box ensures that your filament is in optimal condition when you print with it. This way you are assured of fantastic prints that are printed without any problems. The Space Pi Plus dries the filament during the printing process, so you no longer have to worry about clogging, poor adhesion and shifting of layers. By combining this box with a high speed filament and printer you have an even better high speed printing experience with great results.

Uniform temperature & drying
This box uses the advanced PTC heating system that ensures uniform drying of the filament. It is a sustainable, energy-saving and eco-friendly way of heating. The built-in fan ensures that the warm air from the heating system is distributed 360°, which draws all the moisture from the filament. Use the 12 preset settings for specific filaments. You can also independently change the temperature between 45 °C and 70 °C.

Easy to use
The 4-inch LCD screen makes it easy to operate the dryer. This way you can easily see a countdown and monitor the temperature and humidity in the box. The timer can be set between 0 and 48 hours, so that you can be sure that your filament has been dried optimally. You do not have to re-enter all the settings after a power outage, because the Space Pi remembers the material and temperature settings. It is even possible to use this machine with both 1.75 and 2.85 mm filament.

- Heating time adjustable 0-48 h

- Temperature adjustable 45-70 C

- Suitable for 1.75 or 2.85 mm filaments

- Humidity and temperature display

- Filament adjustable with one click