Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio.
Active Flow Rate Compensation
The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Quick Swap Nozzle
All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.
Active Motor Noise Cancelling
The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality
Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Sync with Bambu Studio and Bambu Handy
Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
| Usable Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 300 ºC |
| Open Filament System | Yes |
| Extruder Type | Direct drive |
| Recommended Printing Speed Max | 500 mm/s ( |
| Build Area | 256 mm x 256 mm x 256 mm |
| Build Plate Temp Max | 100 ºC |
| Build Plate Surface | PEI sheet |
| Build Plate Attachment | magnetic |
| Build Chamber During Process | Open |
| Build Chamber Heated | No |
| Filament Chamber Closed | No |
| Extruder Number Of | 1 |
| Installation Space / Requirements | |
| Total Mass Overall Dimensions | 385 mm x 410 mm x 430 mm |
| Total Weight | 8 kg |
| Max Power Consumption | 1300 W |
| Voltage | AC: 100 V240 V (50-60 Hz) |
| Equipment | |
| Emergency Shutdown | No |
| Hepa Filter | No |
| Door Sensor | No |
| Door Lock During Print | No |
| Filament Runout Sensor | Yes |
| Filament Clogging Sensor | Yes |
| Power Loss Fail Safe | Yes |
| Touch Screen | Yes |
| Camera | Yes |
| Connection | |
| SD Card | No |
| USB Port | No |
| Ethernet Port | No |
| WLAN | Yes |
| Accuracy | |
| Shipping | |
| Shipping Box | 552 mm x 532 mm x 320 mm |
| Shipping Weight | 11.7 kg |
Diese Produkte könnten ebenfalls interessant für Sie sein!